192.168.10.1 is the default IP address utilized by switch organizations, for example, PTCL, TP-Link, D-Link to get to the administrator board settings. Such IP addresses are by and large called Default Gateway IP Address and numerous individuals are uninformed of their Router IP address on the grounds that the greater part of the switch arrangement measure is finished by an expert.
Notwithstanding, you can without much of a stretch discover your switch IP address and afterward make the necessary settings to your switch. You can design everything from the SSID and secret phrase of your remote organization to LAN, WAN, Proxy Settings, and so on from the administrator interface. It is one of the most famous IP address like 192.168.1.1 and 192.168.0.1.
How to login to 192.168.10.1?
You can undoubtedly sign in to the administrator interface of your switch/modem on the off chance that you know the switch IP address or default passage IP. In the event that 192.168.10.1 is the default passage IP for your switch, at that point you can log in to the administrator interface of your switch by following these means.
Interface with your switch's organization either remotely or utilizing an ethernet link.
When associated with the organization, open an internet browser on your PC.
In the address bar, type 192.168.10.1 or http://192.168.10.1 and press Enter.
A login page will show up, requesting that you enter the login username and secret word to proceed. (You can discover the login username and secret key on the manual guide of the switch or quest for it over the web.)
Enter the login username and secret key to sign in.
Once signed in, you will have the option to deal with each setting from the administrator interface.
How to change Network Name and Password through 192.168.10.1?
You can undoubtedly change the SSID and secret word of your remote organization through the administrator interface of your switch. When you login to the administrator interface utilizing IP address, you will have the option to change the SSID and secret phrase and set it as you need to. The cycle is basic and simple and as a rule requires only a couple of minutes. Here is the way you can do as such:
Sign in to the administrator interface of the switch utilizing the previously mentioned.
Once signed in, go to Home > Wireless > Security. (Precisely the same route may vary for your switch yet you would discover these settings in the Wireless segment.)
Look down and search for Network Name/SSID. Enter your new SSID in the given field.
To change the secret word, select the encryption convention for your remote organization, (WPA3 or WPA2 suggested) and enter your new secret phrase in the WPA Passphrase field.
Snap-on Apply/Save to affirm the changes.
How to Reset Router Settings?
In the event that you had changed the login secret key for 192.168.10.1 and failed to remember it, at that point you can without much of a stretch recover admittance to the administrator interface. The login secret key is significant and without it, you won't have the option to log in to the administrator interface. In any case, you can undoubtedly reset the login secret key and login to the administrator interface utilizing the default login username and secret key.
Here is the manner by which you can reset your login secret word and recover admittance to the administrator interface of the switch:
Take a sharp, pointed item, for example, a toothpick or a paperclip.
On the rear of your switch, you will locate a shrouded reset button. Press and hold that catch utilizing a paperclip or toothpick for 10-15 seconds and from that point onward, let it go.
The switch lights will squint and the switch will reboot. After it reboots, all that will be a return to the processing plant default including any changed secret word.
You can sign in to the administrator interface utilizing the default username and secret word. If you are not able to reset your router then you can go to LinkingIQ.com.